排序方式： 共有67条查询结果，搜索用时 15 毫秒
1.
2.
Experimental Study on Sloshing Characteristics in the Elastic Tank Based on Morlet Wavelet Transform
Mei-rong Jiang Wen-jun Zhong Jian-xing Yu Pei-lin Liu Han-jun Yin Shou-dong Wang Yu-xiang Ma 《中国海洋工程》2018,32(4):400-412
Hydroelastic effect of sloshing is studied through an experimental investigation. Different excitation frequencies are considered with low-fill-depth and large amplitude. Morlet wavelet transform is introduced to analyze the free surface elevations and sloshing pressures. It focuses on variations and distributions of the wavelet energy in elastic tanks. The evolutions of theoretical and experimental wavelet spectra are discussed and the corresponding Fourier spectrums are compared. Afterwards, average values of the wavelet spectra are extracted to do a quantitative study at various points. From the wavelet analysis, sloshing energies are mainly distributed around the external excitation frequency and expanded to high frequencies under violent condition. In resonance, experimental wavelet energy of the elevation in elastic tanks is obviously less than that in the rigid one; for sloshing pressures, the elastic wavelet energy close to the rigid one and conspicuous impulse is observed. It recommends engineers to concern the primary natural frequency and impulsive peak pressures. 相似文献
3.
In the field of offshore oil and gas engineering, the arrangement of multiple pipelines are becoming more common, the spacing between the pipelines and the incoming stream velocity will significantly affect the scouring process around the pipelines. In this study, the effect of space ratio (G/D) and the stream velocity on the scouring process around two pipelines in tandem are investigated using the coupled approach of computational fluid dynamics (CFD) and discrete element method (DEM). Here G is the spacing between the pipelines and D is the diameter of the pipeline. Specifically, the effect of space ratio and the stream velocity are discussed by simulating the gap ratio (G/D) between two pipelines ranging from 1 to 3 with an interval of 1, under the stream velocity U = 0.5,1 and 2 m/s, The results indicate that when G/D ≤ 2, the equilibrium scour depth below the upstream pipeline (S1) is slightly larger than that under the downstream pipeline (S2), S1 and S2 slightly increase as the gap ratio increases. Whereas for G/D > 2, the equilibrium scour depth beneath the upstream pipeline is slightly smaller than that under the downstream pipeline, S1 and S2 slightly decrease as the gap ratio increases. Furthermore, the scour depths are highly dependent on and positively related to the incoming stream velocity, the equilibrium bed profiles are similar under the same incident stream velocity with different gap ratios. 相似文献
4.
In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships. 相似文献
5.
介绍某桁架式Spar平台风洞环境载荷测试及分析,为国内首次在风洞中开展的Spar平台风、流载荷模型试验。通过在风洞中模拟真实海洋环境,考虑倾角变化对平台载荷的影响,测试Spar平台水上部分风载和水下部分的流载,给出最大风倾覆力矩风向角,确定平台最容易发生危险的关键风向。试验结果表明:水上部分风阻随纵倾角的增大而增大;风倾覆力矩随倾角增大先增大后减小,在纵倾角10°时达到最大值;水下部分只在流向角-15°～15°范围内,流阻随倾斜角度增大而减小,但最大阻力发生在倾斜角为15°时。试验结果可以为Spar平台设计以及性能预报提供参考。 相似文献
6.
防波堤建设费用巨大,且一旦遭到破坏,后果甚为严重,因此,如何准确地计算防波堤的可靠性意义重大.随着人工神经网络理论的快速发展,人工神经网络方法在结构可靠性分析中的应用逐渐得到重视.基于神经网络的Monte Carlo法计算直立式防波堤的可靠性,概率意义明确.以秦皇岛典型直立堤为算例,采用基于神经网络的Monte Carlo法对直立式防波堤进行可靠性分析时,将直立堤滑动破坏和倾覆破坏的极限状态方程中的所有参数均作为变量处理,并将计算结果与Monte Carlo模拟的直接抽样法、重要抽样法以及独立变量JC法的计算结果进行对比.结果表明:基于神经网络的Monte Carlo法和Monte Carlo模拟的直接抽样法、重要抽样法计算结果相近,而比独立变量JC法的计算结果略低. 相似文献
7.
水平荷载下导管架平台桩基础的非线性有限元分析 总被引：2，自引：0，他引：2
导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比。研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考。 相似文献
8.
《Ocean Modelling》2009,26(3-4):95-119
A new real-time, event-triggered storm surge prediction system has been developed for the State of North Carolina to assist emergency managers, policy-makers and other government officials with evacuation planning, decision-making and resource deployment during tropical storm landfall and flood inundation events. The North Carolina Forecast System (NCFS) was designed and built to provide a rapid response assessment of hurricane threat, accomplished by driving a high-resolution, two-dimensional, depth-integrated version of the ADCIRC (Advanced Circulation) coastal ocean model with winds from a synthetic asymmetric gradient wind vortex. These parametric winds, calculated at exact finite-element mesh node locations and directly coupled to the ocean model at every time step, are generated from National Hurricane Center (NHC) forecast advisories the moment they are inserted into the real-time weather data stream, maximizing the number of hours of forecast utility. Tidal harmonic constituents are prescribed at the open water boundaries and applied as tidal potentials in the interior of the ocean model domain. A directional surface roughness parameterization that modulates the wind speed at a given location based on the types of land cover encountered upwind, a forest canopy sheltering effect, and a spatially varying distribution of Manning’s–n friction coefficient used for computing the bottom/channel bed friction are also included in the storm surge model. Comparisons of the simulated wind speeds and phases against their real meteorological counterparts, of model elevations against actual sea surface elevations measured by NOAA tide gauges along the NC coast, and of simulated depth-averaged current velocities against Acoustic Doppler Current Profiler (ADCP) data, indicate that this new system produces remarkably realistic predictions of winds and storm surge. 相似文献
9.
10.
The Qiongdongnan Basin is a strongly overpressured basin with the maximum pressure coefficient over 2.2. Two types of vertical overpressure configuration can be identified by electronic logs and mud pressure, based on the calibration with the test pressure. The first is a double overpressure configuration, in which the middle low overpressure zone divides the entire overpressure zone into two zones. The double overpressure configuration lies primarily in the western part of the basin. The second is a single overpressure configuration, in which overpressure increases with depth. The single overpressure configuration lies primarily in the eastern part of the basin. Distribution maps of the overpressure top and overpressure horizons show three important characteristics: (1) The distribution of the pressure coefficient is not uniform. There are many low overpressure zones against a background of high overpressure. (2) The pressure coefficient in the western area is greater than in the eastern area. The maximum pressure coefficient in the western area is greater than 2.2. (3) There is a low overpressure interval between the high overpressure zones in the western area. Based on the overpressure distribution, some important implications for hydrocarbon exploration can be drawn. In the Qiongdongnan Basin, it has been shown that normal pressure zones are favorable for hydrocarbon accumulation, and strongly overpressured zones (pressure coefficient greater than 1.8) are unfavorable for hydrocarbon accumulation. Accordingly, the NW low overpressure belt around wells R, Q and S should be beneficial for hydrocarbon accumulations, and should be considered as the next exploration play in the Qiongdongnan Basin. Theoretical hydrofracture calculation and interpretation of the sand injectites indicate the presence of widespread hydrofractures in the basin. Comparison between the sealing capacities of the double overpressure and single overpressure configurations shows that the former is superior for hydrocarbon accumulation and preservation. Because of the strong sealing capacity provided by the displacement pressure and pore pressure difference between the seal rock and reservoir in the double overpressure configuration zone, hydrocarbons barely penetrate the seal rock in the middle low overpressure zone. Therefore, the exploration interval should be within and below the middle low overpressure zone in the western basin. 相似文献